With Easee Ready (backplate and blind cover) you can prepare to get a future charging point at low cost.
To upgrade to a full charge point, you can at any time buy the Easee Plug & Play (Chargeberry and front cover in any colour).
It’s scalable thanks to our innovative Plug & Play technology. This allows you to easily scale the system without any additional electrical work.
Easee Ready – Prepared charging point for easy scaling as needed.
Easee Plug & Play – Mount the Chargeberry easily when the need for charging arises.
Easee Plug & Play – You don’t need any tools or assistance from an electrician. Ready, set, go!
Easee Ready – Comes with a seamless blind cover that is easy to click on or off.
Easee Ready – Available for both Easee Home and Charge.
Why choose Easee Ready?
Easy to scale
We understand that charging needs change over time. Therefore, it should be easy and inexpensive to expand the charging system. The Charging Robot acts as an intelligent junction box and supports the expansion of several charging stations on the same cable. This allows you to easily scale the system when the need for charging changes.
Supports extension of multiple Charging Robots on the same cable.
Available for both Easee One and Easee Charge.
Developed and produced in Norway.
Prepared charging point
With a connected and programmed Easee Ready backplate, you get a parking space ready for future electric car charging at a very low cost.
Simple to Install
With Easee Ready, you choose when you want to complete the charging point by just adding the hardware upon demand. When the need for charging arises, order the Easee Plug & Play and mount the Charging Robot.
Plug & Play
The patented Easee Ready backplate enables the installation of an Easee Plug & Play Charging Robot in just 15 seconds.
Easee Plug & Play
With Easee Ready installed, there is no need to pay extra to install Easee Plug & Play. By following the instructions, anyone can easily connect the Plug & Play Charging Robot and the front cover. Quick, safe and easy.
Two simple steps
Assemble it yourself
in 15 seconds
1. Easee Ready
The Easee Ready backplate must be connected and programmed. When the need for charging arises, order the Easee Plug & Play Charging Robot with a front cover in your desired colour.
2. Easee Plug & Play
Click off the blind cover, slide in the Plug & Play Charging Robot and then click on the front cover. Pretty much anyone can do this. Ready, set, go!